could anyone send me the specs on how to make one

Check out the new pics hopefully this will get some ideas flowing
and get some good discussions going.
Jeezer

I have'nt built one in a while. I got leary of them blowing up on me
all the time...... Nothing less than a little pure oxygen and
propane was good enough for me. I was hooked on the HUGE flame and
the "rifle like" boom that propane could produce.
And I've built them all....handgun sized, super sized 12' long, and
everything in between. I had one with a 1/2" barrel for bing
cherries.....those little suckers hurt!!
I was going to build one out of metal, but i could'nt find anyone to
weld it for me once they found out what it was that i was
building......hehehe....oh well......

mike

cleaned the dirty crap out that spammers put in, and put one up for
SpudTech.com if you have not been to that site, go now!

vote

Enter your vote today!  A new poll has been created for the
Pressurized_air_cannons group:

Weapon of choice....shouldent say
weapon sorry, spudder of choise!

   o Pneumatic
   o Combustion


To vote, please visit the following web page:

http://groups.yahoo.com/group/Pressurized_air_cannons/surveys?id=329512

Note: Please do not reply to this message. Poll votes are
not collected via email. To vote, you must go to the Yahoo! Groups
web site listed above.

Thanks!

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the Pressurized_air_cannons
group.

   File        : /Click here for a great dating service
   Uploaded by : pohamivipe1282 <pohamivipe1282@...>
   Description : Browse through singles

You can access this file at the URL

http://groups.yahoo.com/group/Pressurized_air_cannons/files/Click%20here%20for%2\
0a%20great%20dating%20service

To learn more about file sharing for your group, please visit

http://help.yahoo.com/help/us/groups/files

Regards,

pohamivipe1282 <pohamivipe1282@...>

This is a specialized Air Cannon group, please keep all that porn and
dating crap out of the group as it has nothing to do with air
cannons.  The moderator of the group should ban this member.






--- In Pressurized_air_cannons@yahoogroups.com,
Pressurized_air_cannons@yahoogroups.com wrote:
>
> Hello,
>
> This email message is a notification to let you know that
> a file has been uploaded to the Files area of the
Pressurized_air_cannons
> group.
>
>   File        : /Click here for a great dating service
>   Uploaded by : pohamivipe1282 <pohamivipe1282@y...>
>   Description : Browse through singles
>
> You can access this file at the URL
>
> http://groups.yahoo.com/group/Pressurized_air_cannons/files/Click%
20here%20for%20a%20great%20dating%20service
>
> To learn more about file sharing for your group, please visit
>
> http://help.yahoo.com/help/us/groups/files
>
> Regards,
>
> pohamivipe1282 <pohamivipe1282@y...>

Just took our monster air cannon out for a test drive last week and
talk about impressive.  Busted a hole right through our shop wall,
needless to say my buddies wife wasn't too happy about that.  We
build Full Size reproduction civil war cannons, except this time we
outfitted this beast to shoot tennis balls at high velocities.  Our
end results will be to launch t-shirts out of the barrel at the
college civil war games.  I will upload some avi and pics when we
take her out for our distance and velocity test this month.  You can
see what we build at www.VicksburgCannons.com Just imagine one of
these babies taking aim with a tennis ball.

Done..., I know I hardly come on here, but I try to do the most to
keep the people that do come here happy


--- In Pressurized_air_cannons@yahoogroups.com, "Surveillance
Specialist" <deepersouth_pi@y...> wrote:
> This is a specialized Air Cannon group, please keep all that porn
and
> dating crap out of the group as it has nothing to do with air
> cannons.  The moderator of the group should ban this member.
>
>
>
>
>
>
> --- In Pressurized_air_cannons@yahoogroups.com,
> Pressurized_air_cannons@yahoogroups.com wrote:
> >
> > Hello,
> >
> > This email message is a notification to let you know that
> > a file has been uploaded to the Files area of the
> Pressurized_air_cannons
> > group.
> >
> >   File        : /Click here for a great dating service
> >   Uploaded by : pohamivipe1282 <pohamivipe1282@y...>
> >   Description : Browse through singles
> >
> > You can access this file at the URL
> >
> > http://groups.yahoo.com/group/Pressurized_air_cannons/files/Click%
> 20here%20for%20a%20great%20dating%20service
> >
> > To learn more about file sharing for your group, please visit
> >
> > http://help.yahoo.com/help/us/groups/files
> >
> > Regards,
> >
> > pohamivipe1282 <pohamivipe1282@y...>

why don't we get the ball rolling. start up some
topics. bring life to the group. any ideas?

--- static_air101 <Static_Air@...> wrote:
> Done..., I know I hardly come on here, but I try to
> do the most to
> keep the people that do come here happy
>
>
> --- In Pressurized_air_cannons@yahoogroups.com,
> "Surveillance
> Specialist" <deepersouth_pi@y...> wrote:
> > This is a specialized Air Cannon group, please
> keep all that porn
> and
> > dating crap out of the group as it has nothing to
> do with air
> > cannons.  The moderator of the group should ban
> this member.
> >
> >
> >
> >
> >
> >
> > --- In Pressurized_air_cannons@yahoogroups.com,
> > Pressurized_air_cannons@yahoogroups.com wrote:
> > >
> > > Hello,
> > >
> > > This email message is a notification to let you
> know that
> > > a file has been uploaded to the Files area of
> the
> > Pressurized_air_cannons
> > > group.
> > >
> > >   File        : /Click here for a great dating
> service
> > >   Uploaded by : pohamivipe1282
> <pohamivipe1282@y...>
> > >   Description : Browse through singles
> > >
> > > You can access this file at the URL
> > >
> > >
>
http://groups.yahoo.com/group/Pressurized_air_cannons/files/Click%
> > 20here%20for%20a%20great%20dating%20service
> > >
> > > To learn more about file sharing for your group,
> please visit
> > >
> > > http://help.yahoo.com/help/us/groups/files
> > >
> > > Regards,
> > >
> > > pohamivipe1282 <pohamivipe1282@y...>
>
>


__________________________________
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
http://antispam.yahoo.com/whatsnewfree

i bout a rain bird valve 1ich straet tipe but it did not wory leat
air out slow tryed new batres/3 9 volts the valve wus good but i
could not get to work weth air(70psi)but weth woter it did fine
why?   paintballer53/cannon fanatick!!!!!!!!!!

ok, an in-line 1inch sprinkler valve, to get better performance loose
the electronics and convert it to Pneumatic, simply drilling the top
and tapping it for a blowgun or small ball valve will really
increases the performance for the valve, here is some instructions:
what you will need, A clean work area, JB weld, A Tap for 1/4" NPT, a
drill, and a screw driver, and a 1/2" drill bit,
1. Unscrew the solenoid (black thing with wires) and put it aside or
in a box,
2. Unscrew all the screws in the top of your valve and remove the
lid, but be carful not to lose the spring inside
3. In the center on top of the lid drill a 1/2" hole
4. Tap the hole for 1/4" NPT (I used a 1/2-13 NC 27/64 tap)
5. the part where the solenoid was screwed into is now going to be
filled with JB-weld (about $5) after you have that all filled let it
dry
6. reassemble the valve (MAKE SURE TO PUT THE SPRING BACK IN)
7. using a barbed fitting for an airhose, or just a threaded fitting
screw that into the tapped hole ontop of the valve (use a small
amount
of JB-Weld) for the air hose attach it to a blowgun or using a
threaded fitting just attach the blowgun or small ball valve to that,
8. after everything is dry your valve is now ready for action, test
it at 50psi a couple times, listen for leaks, if everything is ok go
for the big 100psi.

if you need more info here is a site with pictures and instructions
http://spudcannons.no-ip.com/sprinkler_valves.htm

have any questions go to this site and join the forums
http://www.spudtech.com

--- In Pressurized_air_cannons@yahoogroups.com, "paintballer52"
<paintballer52@y...> wrote:
> i bout a rain bird valve 1ich straet tipe but it did not wory leat
> air out slow tryed new batres/3 9 volts the valve wus good but i
> could not get to work weth air(70psi)but weth woter it did fine
> why?   paintballer53/cannon fanatick!!!!!!!!!!

thank you i well post pic of the cannon when i finesh it i ded test
valv and it ded better then my 1inc ball by 50 yards at 75 psi
paintballer52

Well I am a new member to this Spud gun group, and just wanted to say hey to
everyone.  I have personally built 3 pneumatic
cannons, and I think they are great.  I've built a regular pneumatic potato
launcher, a double barrel launcher with solenoid valves (using
some check valves, I only have to pump one valve up), and a bolt-action grape
gun which is a pretty tight design I think.  Hopefully I
can get around to uploading some  of this stuff, but I'm pretty new to this
format, so whatever.  Oh yeah I am planning on building
another gun with a piston type valve on it (like where the solenoid valve
actuates a piston to make air come out of the main chamber).
If anyone has built one of these guns please let me know, I'd like to know your
thoughts on it.

-Jeremy

Hello people,
     My name is John, I'm looking for a professional grade air cannon,
highly accurate, designed by the best in this business,135mmX5',
or100mm(softball size) or 60mm (baseball size)I'm a quick study and
have the needed cash, interested in waterballoon delivery, paintball
technology, and other forms of good clean fun!
  (862)684-7557 call anytime, I'm in Northern New Jersey and can
travel for demo.
thanks again,
JR

Hey I sent you an e-mail with some info to help you out, I put "Joel
Suprise" in the subject line, he is the guy I think you need

--- In Pressurized_air_cannons@yahoogroups.com, "thepitbroker"
<thepitbroker@y...> wrote:
>   Hello people,
>     My name is John, I'm looking for a professional grade air
cannon,
> highly accurate, designed by the best in this business,135mmX5',
> or100mm(softball size) or 60mm (baseball size)I'm a quick study and
> have the needed cash, interested in waterballoon delivery,
paintball
> technology, and other forms of good clean fun!
>  (862)684-7557 call anytime, I'm in Northern New Jersey and can
> travel for demo.
> thanks again,
> JR

Me and a couple of friends just built some potatoe cannons and we
found that limes are much better than spuds.  They flew
significantly farther,  and cost about the same. If the lime is a
little too big for the barrel we would just roll it under our foot
until it was softened some. Then we would use some soap to lube the
barrel slightly.   I think though when limes go out of season they
will probably cost alot more but it is definately worth trying...

Cal

you can also sand or cut and outer edge of the barrel opening to be
sharp like a knife, this will make fitting produce easier

We do that with potatoes but have found that limes are best left
uncut.

--- In Pressurized_air_cannons@yahoogroups.com, "static_air101"
<Static_Air@h...> wrote:
> you can also sand or cut and outer edge of the barrel opening to
be
> sharp like a knife, this will make fitting produce easier

Take a look at our new online store and browse through our several
electric spark ignition, combustion potato guns.  We also supply
reusable potato gun ammunition, our very own Spud Bombs.  Take a
look around, and contact us with any questions you have.

http://scudlauncher.homestead.com/index.htm

hope u like my 1st useable paintball cannon pic i am working on a
rainberd oprated air cannon 4 paintball

--- In Pressurized_air_cannons@yahoogroups.com, "paintballer52"
<paintballer52@y...> wrote:
> hope u like my 1st useable paintball cannon pic i am working on a
> rainberd oprated air cannon 4 paintball
it looks good I would like to see a couple of close ups of the cannon
good job

can anyone tell me where to find a set of blueprints or send me a few
suggestions on how to make my own air cannon

--- In Pressurized_air_cannons@yahoogroups.com, "John"
<trotncode@y...> wrote:
> can anyone tell me where to find a set of blueprints or send me a
few
> suggestions on how to make my own air cannon
sure what do you want to shoot? look at some of mine in the jeezer
folder and let me know.
lance

I posted some pics of my Bud-Zooka, Im bud and its a zooka, pretty
standard, but fun as hell....

Hello, Pressurized_air_cannons member.
This company really helped me out.
I almost lost my home.
I am self employed and I was able to refinance.
The best interest rates are available, for a limited time
Don't miss out stop in today.
http://aloanprocess.net/?partid=rcc1
This email was sent because you joined our group.
If you do not wish to recieve any emails, unsubscribe.
by sending a mail here Pressurized_air_cannons-unsubscribe@yahoogroups.com

i have made this one 4 paintball i am posting pics in group in the
paintball file ( paintballer52 team dark tide heavy wepons
)

I have built my second Full Scale Civil War Air Cannon.  This guy
has so much power, it is impressive.  It was made to launch tennis
balls or rolled t-shirts.  You can see some of our cannons at
www.VicksburgCannons.com the air cannon is exactly the same as
cannons pictured but with an air nipple for pressurizing.  Anyone
interested in a full scale barrel, let me know I will sell my first
2.  Starting my 3rd tomorrow.  Just send me an email.  Carriages are
seperate.

Cool group! I'm very happy to join in the fun.  I'm a machinist and
tinkerer and have alot of gun experience and have always wanted to join
in learning more about this "sport" ever since a friend of mine fired a
potatoe across the ramp over a runway to another hanger many yards
away.  In fact alot of people are using home made cannons to scare off
birds [which are pests to pilots wanting to fly safely] from the ends
of runways now.



__________________________________
Do you Yahoo!?
Yahoo! Mail - Helps protect you from nasty viruses.
http://promotions.yahoo.com/new_mail