Hi, "Just pulled the battery out of her for the Winter." If not already done, I would strongly suggest running the engine out of fuel, or running the engine...
Hello All, Looks like I need a complete set of new belts. My drive belt kept on coming off the pulley, after looking it at a while it looks like the drive belt...
I think I need to replace the starter on my mower but thought I would describe my symtoms here first. The starter (since we bought the tractor earlier this...
Hello All, Just a story to share: Got my 14.5 HP Signature 2000 mower doing heavy duty work right now, I normally use it to cut about an acre of grass every...
Since you have a 14/42 its basically a "600" series mtd,can you post the info from the motor shroud tag? it might give us a idea what year it was made. Here...
I just bought a 14/42 Signature 2000 Elite and cannot find a plate or sticker anywhere with the model and serial number. It is my understanding that it should...
Thanks 4 the lithium grease advice, i was using wd40 cause it was what i had at the time b ut will go back and put in the good stuff, agian thanks. ... From:...
Hi, I like your idea of keeping out debris. My experience with WD40 is that it dries fairly qickly. It is a "water dispersant". Might I suggest using white...
I was cleaning my mower and found that grass was building up inside the crossbar behind the 1/2 in rod of the steering assy that goes thru vertically with a...
Ive used tire slime- y haveta put quite a bit in to be effective. Depends where the leak is- if its a sidewall, try the slime for a small crack in it- in the...
Hello All, I put the new belt on, and loosen up the belt tension bar and she worked great today, cut about two acres with her. Had a front tire that kept on...
Hello Dennis, I would suggest doing a search on this part number....a bit of research should get you some 'competitive' prices. If you have a local NAPA,...
I just replaced my deck belt with a 1/2 X 72 ince. it works. ... From: bufbooth <bufbooth@...> Subject: Re: [Signature2000Elite] Correct Blade Belt... ...
Hello Richard, Â Thank you for the infomation. Â Also, I picked up an 18/42 over the winter for $50 as a parts machine, but it actually may be in better...
The part # for my 42 inch deck is 754-0371A even tho I have a 18 /42 the deck size is the same as yours and the belt should be the same size. This is the Sears...
If it's the same B&S engine that I have on my mower then it is not an OHV engine. In that case I would think that it is not practical to rebuild it. On the...
Hi Mike, Check the Files section for the TMO310002 (?) Owner's Manual. The parts list will give you the belt numbers and an online search should reveal sizes...
I have a 42 inch 2000 elite. dont know what year and cant read the model number. I broke a belt and replaced it with the length as close as i canbut it will...
I can find my original post, but thank you Kidd for your insight on my problem regarding top three gears and speed - pulled that center pulley out, lubricated...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
