Does your cable have the serial plug or usb?

http://www.ham-radio-deluxe.com/Support/HRDConnectionProblems/tabid/112/Default.\
aspx

jeff
va3xq



--- In ham-radio-deluxe@yahoogroups.com, "chevk30" <chevk30@...> wrote:
>
> Yes I tried searching the old archives before asking. I see that this has been
asked many times before. Yes I have checked the baud rate, the comm port #,
checking the boxes etc. Still can't get this to work. Using a Yaesu 897 and
factory yaesu ct-62 cable that came with the yaesu programming software. It will
not read the frequency. Any ideas would be appreciated. Thanks.
>

--- In ham-radio-deluxe@yahoogroups.com, "chevk30" <chevk30@...> wrote:
>
> Yes I tried searching the old archives before asking. I see that this has been
asked many times before. Yes I have checked the baud rate, the comm port #,
checking the boxes etc. Still can't get this to work. Using a Yaesu 897 and
factory yaesu ct-62 cable that came with the yaesu programming software. It will
not read the frequency. Any ideas would be appreciated. Thanks.
>

You may already made these sttings but just in case
menu settings on FT-897

Menu 16 set to CAT
Menu 20 set to Cat rate 38400 set same in HRD
Menu 85 set to OFF

My 2¢

Lan

Just curiosity.  Can I do psk31 on HRD?  Also is new log book ready?

Bob

I see there is a Version 5 available but when I go to HRD website and try to
click on the download, it doesn't work. Anyone know how to download Ver 5?

Thanks & 73s

Hi Bob,

I don't understand your question. DM780 offers PSK31 and various other modes.

The new logbook is in the hands of testers. I presume that it will be public at
the end of this month (July)

73
José F5JD

--- In ham-radio-deluxe@yahoogroups.com, "n2slb" <n2slb@...> wrote:
>
> Just curiosity.  Can I do psk31 on HRD?  Also is new log book ready?
>
> Bob
>

www.ham-radio-deluxe.com/HRDv5/tabid/139/Default.aspx

It won't be available until July 4/5, 2009 as a beta kit.

I got here by going to the download page, clicked the DOWNLOADS tab without
doing any of the pull-downs.

73 de Jim, KU0G
www.northamericantrafficandawards.net


-----Original Message-----
From: ham-radio-deluxe@yahoogroups.com
[mailto:ham-radio-deluxe@yahoogroups.com] On Behalf Of wd8mbe
Sent: Thursday, July 02, 2009 2:50 PM
To: ham-radio-deluxe@yahoogroups.com
Subject: [ham-radio-deluxe] HRD Ver 5

I see there is a Version 5 available but when I go to HRD website and try to
click on the download, it doesn't work. Anyone know how to download Ver 5?

Thanks & 73s




------------------------------------

--- S u p p o r t   H R D ---
Please visit http://www.ham-radio.ch/donations.htm to sponsor the HRD
development.Yahoo! Groups Links

Am Donnerstag, den 02.07.2009, 19:50 +0000 schrieb wd8mbe:
> I see there is a Version 5 available but when I go to HRD website and try to
click on the download, it doesn't work. Anyone know how to download Ver 5?
>
> Thanks & 73s
>

Not yet. Look at the side: July 4th / 5th 2009

Stay tuned. :-)

73 de DO1YHJ  Heinz-Juergen

I should be available to download Sat/Sun 4th/5th July 2009.



John H. Long Jr.
KW7A
PO Box 567
East Carbon, Utah 84520
USA


-------- Original Message --------
Subject: [ham-radio-deluxe] HRD Ver 5
From: "wd8mbe" <wd8mbe@...>
Date: Thu, July 02, 2009 1:50 pm
To: ham-radio-deluxe@yahoogroups.com



I see there is a Version 5 available but when I go to HRD website and
try to click on the download, it doesn't work. Anyone know how to
download Ver 5?

Thanks & 73s

Currently there is a technology preview available of Version 5 (
http://forums.ham-radio.ch/showthread.php?t=14728&highlight=2151) and as
noted on the site it appears the new beta version should be available this
weekend on July 4th or 5th.

73's

Michael, AA5SH

On Thu, Jul 2, 2009 at 2:50 PM, wd8mbe <wd8mbe@...> wrote:

>
>
> I see there is a Version 5 available but when I go to HRD website and try
> to click on the download, it doesn't work. Anyone know how to download Ver
> 5?
>
> Thanks & 73s
>
>
>


[Non-text portions of this message have been removed]

Mon ami.  Thanks for reply.  I have nothing against DM780.  Just curious about
whether I could use HRD alone.  Just a typical ham who cannot leave well enough
alone.  Hope all is well with you.  Remember how you helped me out on a
telephone call.  73 and merci beaucoup  Bob--- In
ham-radio-deluxe@yahoogroups.com, José Dumoulin <f5jd@...> wrote:
>
> Hi Bob,
>
> I don't understand your question. DM780 offers PSK31 and various other modes.
>
> The new logbook is in the hands of testers. I presume that it will be public
at the end of this month (July)
>
> 73
> José F5JD
>
> --- In ham-radio-deluxe@yahoogroups.com, "n2slb" <n2slb@> wrote:
> >
> > Just curiosity.  Can I do psk31 on HRD?  Also is new log book ready?
> >
> > Bob
> >
>

Bob,

The old HRD version has a PSK31 button. It has been deleted in version 5 which
offers DM780 with various digi modes.

When V5 is out, questions will flow. Hi...

73 es CUAGN.

José F5JD

--- In ham-radio-deluxe@yahoogroups.com, "n2slb" <n2slb@...> wrote:
>
> Mon ami.  Thanks for reply.  I have nothing against DM780.  Just curious about
whether I could use HRD alone.  Just a typical ham who cannot leave well enough
alone.  Hope all is well with you.  Remember how you helped me out on a
telephone call.  73 and merci beaucoup  Bob--- In
ham-radio-deluxe@yahoogroups.com, José Dumoulin <f5jd@> wrote:
> >
> > Hi Bob,
> >
> > I don't understand your question. DM780 offers PSK31 and various other
modes.
> >
> > The new logbook is in the hands of testers. I presume that it will be public
at the end of this month (July)
> >
> > 73
> > José F5JD
> >
> > --- In ham-radio-deluxe@yahoogroups.com, "n2slb" <n2slb@> wrote:
> > >
> > > Just curiosity.  Can I do psk31 on HRD?  Also is new log book ready?
> > >
> > > Bob
> > >
> >
>

--- In ham-radio-deluxe@yahoogroups.com, "wd8mbe" <wd8mbe@...> wrote:
>
> I see there is a Version 5 available but when I go to HRD website and try to
click on the download, it doesn't work. Anyone know how to download Ver 5?
>
> Thanks & 73s
>
Thanks everyone.. If these old eyes had just looked at the page a little longer,
I would have seen the release dates.

Tom, WD8MBE, 73s

I have tried everything that I know, to see how I can consolidate the two
different log books into just one. I have to PCs that I normally used with HRD
and my FT-857D. but my logs are not the same, and I will like to consolidate
them.
Could you help me out with this matter?

Thank you.

Juan Quiroga
KI4RXE

I suppose that you use build 2055. Have you tried to export one log to ADIF,
then open the other one (backup first) and import from ADIF just created.

José F5JD

--- In ham-radio-deluxe@yahoogroups.com, "juanpabloquiroga78"
<juanpabloquiroga78@...> wrote:
>
> I have tried everything that I know, to see how I can consolidate the two
different log books into just one. I have to PCs that I normally used with HRD
and my FT-857D. but my logs are not the same, and I will like to consolidate
them.
> Could you help me out with this matter?
>
> Thank you.
>
> Juan Quiroga
> KI4RXE
>

I have a problem with HRD and the Kenwood TS-2000 extended menu reading.

When I read from the TS-2000 menu # 28a always comes up with a red X in
front of it.

In the "Value" column  it has "Unknown (2)" and the "Range" column has only
2.



The "Value" column should be "2" and the "Range" column should be " OFF, 1,
2"

The same as menu # 28b, 28c, 28d and 28e.

I am using the latest version of HRD but this has been a problem for MANY
versions before.



I wonder if some of you with TS-2000's, if you haven't noticed this, could
you check it out?



I do NOT have this problem with other programs such a Kenwood's MCP-2000
memory program.



73 de Tony, KD4K







[Non-text portions of this message have been removed]

Rename log to logbook2.mdb then click import HRD logbook2.mdb log and it will
place the entries into your main log ....
 Ruben Echevarria KA2HHB
SKCC #2132 EPC#3390 070 Club#861
10-10 International Club #33308
30Meter Digital Group #1148




________________________________
From: José Dumoulin <f5jd@...>
To: ham-radio-deluxe@yahoogroups.com
Sent: Friday, July 3, 2009 1:13:34 AM
Subject: [ham-radio-deluxe] Re: HRD in two different pcs, two differnt logs





I suppose that you use build 2055. Have you tried to export one log to ADIF,
then open the other one (backup first) and import from ADIF just created.

José F5JD

--- In ham-radio-deluxe@ yahoogroups. com, "juanpabloquiroga78 "
<juanpabloquiroga78 @...> wrote:
>
> I have tried everything that I know, to see how I can consolidate the two
different log books into just one. I have to PCs that I normally used with HRD
and my FT-857D. but my logs are not the same, and I will like to consolidate
them.
> Could you help me out with this matter?
>
> Thank you.
>
> Juan Quiroga
> KI4RXE
>




[Non-text portions of this message have been removed]

copy1
ham radio delux build 2055





________________________________
Jose:
After I downloaded the build 2055 and the file got unzip it is requesting a
password.
for the hamradiodeluxe file. Do I need to have that password?

Thank you for your help.

Juan Quiroga
KI4RXE



From: José Dumoulin <f5jd@...>
To: ham-radio-deluxe@yahoogroups.com
Sent: Friday, July 3, 2009 1:13:34 AM
Subject: [ham-radio-deluxe] Re: HRD in two different pcs, two differnt logs





I suppose that you use build 2055. Have you tried to export one log to ADIF,
then open the other one (backup first) and import from ADIF just created.

José F5JD

--- In ham-radio-deluxe@ yahoogroups. com, "juanpabloquiroga78 "
<juanpabloquiroga78 @...> wrote:
>
> I have tried everything that I know, to see how I can consolidate the two
different log books into just one. I have to PCs that I normally used with HRD
and my FT-857D. but my logs are not the same, and I will like to consolidate
them.
> Could you help me out with this matter?
>
> Thank you.
>
> Juan Quiroga
> KI4RXE
>







[Non-text portions of this message have been removed]

What is the difference between the Kit download and the CD download?

Jim Duncan wrote:
>
>
> www.ham-radio-deluxe.com/HRDv5/tabid/139/Default.aspx
>
> It won't be available until July 4/5, 2009 as a beta kit.
>
> I got here by going to the download page, clicked the DOWNLOADS tab
> without
> doing any of the pull-downs.
>
> 73 de Jim, KU0G
> www.northamericantrafficandawards.net
>
> -----Original Message-----
> From: ham-radio-deluxe@yahoogroups.com
> <mailto:ham-radio-deluxe%40yahoogroups.com>
> [mailto:ham-radio-deluxe@yahoogroups.com
> <mailto:ham-radio-deluxe%40yahoogroups.com>] On Behalf Of wd8mbe
> Sent: Thursday, July 02, 2009 2:50 PM
> To: ham-radio-deluxe@yahoogroups.com
> <mailto:ham-radio-deluxe%40yahoogroups.com>
> Subject: [ham-radio-deluxe] HRD Ver 5
>
> I see there is a Version 5 available but when I go to HRD website and
> try to
> click on the download, it doesn't work. Anyone know how to download Ver 5?
>
> Thanks & 73s
>
> ------------------------------------
>
> --- S u p p o r t H R D ---
> Please visit http://www.ham-radio.ch/donations.htm
> <http://www.ham-radio.ch/donations.htm> to sponsor the HRD
> development.Yahoo! Groups Links
>
>

Info here :
http://www.ham-radio-deluxe.com/HRDv5/tabid/139/Default.aspx

73
José F5JD

Is it possible to control ICOM rigs, such as the 756 Pro III, so that
their built-in digital voice recorder or CW keyer memories can be
accessed through HRD?

The alternative is to use a hardware device that be purchased or built
quite simply, but I was wondering if it might be possible to do this via
software control.

73,

Rick, KV9U

I must make clear that there is nothing to download now.

José F5JD

--- In ham-radio-deluxe@yahoogroups.com, José Dumoulin <f5jd@...> wrote:
>
> Info here :
> http://www.ham-radio-deluxe.com/HRDv5/tabid/139/Default.aspx
>
> 73
> José F5JD
>

HRD has a voice recorder. Found in the user guide, page 49 :

The audio grabber stores incoming audio in MP3 files using the MP3 tags to store
information about the radio settings (or any other information you feel to be
important).

José F5JD

--- In ham-radio-deluxe@yahoogroups.com, Rick W <mrfarm@...> wrote:
>
> Is it possible to control ICOM rigs, such as the 756 Pro III, so that
> their built-in digital voice recorder or CW keyer memories can be
> accessed through HRD?
>
> The alternative is to use a hardware device that be purchased or built
> quite simply, but I was wondering if it might be possible to do this via
> software control.
>
> 73,
>
> Rick, KV9U
>

Jose,
Yup, and that's a nifty alternative, was
wondering about the original question though, can
HRD utilize the built-in digital voice recorder
(i.e. if not to record, but to actuate the
recordings, such as calling cq which I've
previously recorded) ?

Jerry
KB2GCG

>HRD has a voice recorder. Found in the user guide, page 49 :
>
>The audio grabber stores incoming audio in MP3
>files using the MP3 tags to store information
>about the radio settings (or any other
>information you feel to be important).
>
>José F5JD
>
>--- In ham-radio-deluxe@yahoogroups.com, Rick W <mrfarm@...> wrote:
>>
>>  Is it possible to control ICOM rigs, such as the 756 Pro III, so that
>>  their built-in digital voice recorder or CW keyer memories can be
>>  accessed through HRD?
>>
>>  The alternative is to use a hardware device that be purchased or built
>>  quite simply, but I was wondering if it might be possible to do this via
>>  software control.
>>
>>  73,
>>
>>  Rick, KV9U
>>
>
>
>
>
>------------------------------------
>
>--- S u p p o r t   H R D ---
>Please visit
>http://www.ham-radio.ch/donations.htm to sponsor
>the HRD development.Yahoo! Groups Links
>
>
>

--
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
"Those who would give up essential liberty to
purchase a little temporary safety, deserve
neither liberty nor safety." - Ben Franklin

It's also true that those who would give up
privacy for security are likely to end up with
neither.

It's not the years in your life that count, but the life in your years"

"Change is Inevitable, Growth is Optional"

"Without continual growth and progress, such words as improvement,
   achievement and success have no meaning." - Benjamin Franklin

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

I followed the directions and i was able to do the merge.

Thank you for your help .

Juan Quiroga
KI4RXE


________________________________
From: Ruben Echevarria <ka2hhb_2000@...>
To: ham-radio-deluxe@yahoogroups.com
Sent: Friday, July 3, 2009 12:11:44 PM
Subject: Re: [ham-radio-deluxe] Re: HRD in two different pcs, two differnt logs





Rename log to logbook2.mdb then click import HRD logbook2.mdb  log and it will
place the entries into your main log ....
  Ruben Echevarria KA2HHB
SKCC #2132 EPC#3390 070 Club#861
10-10 International Club #33308
30Meter Digital Group #1148

____________ _________ _________ __
From: José Dumoulin <f5jd@...>
To: ham-radio-deluxe@ yahoogroups. com
Sent: Friday, July 3, 2009 1:13:34 AM
Subject: [ham-radio-deluxe] Re: HRD in two different pcs, two differnt logs

I suppose that you use build 2055. Have you tried to export one log to ADIF,
then open the other one (backup first) and import from ADIF just created.

José F5JD

--- In ham-radio-deluxe@ yahoogroups. com, "juanpabloquiroga78 "
<juanpabloquiroga78 @...> wrote:
>
> I have tried everything that I know, to see how I can consolidate the two
different log books into just one. I have to PCs that I normally used with HRD
and my FT-857D. but my logs are not the same, and I will like to consolidate
them.
> Could you help me out with this matter?
>
> Thank you.
>
> Juan Quiroga
> KI4RXE
>

[Non-text portions of this message have been removed]







[Non-text portions of this message have been removed]

I am running Build 2055.  I am using the logbook, but can not figure out how to
make the display show previous contacts.  The "Worked" display comes on, but no
other info about when or comments etc.

Is there a way to have the previous contacts displayed?

Paul K.
TNX ... es ... 73S ... de ... WA0BAG
DIT  ..  DIT

Yes, Paul. Read page 77 to 79 of the user guide. The Log tab (bottom of the ALE
offers three choices :

Last 100
Shows the most recent 100 entries from the logbook.

Partial match
List the most recent 100 entries from the logbook that partially match the
currently entered callsign.
Exact match

List the most recent 100 entries from the logbook that match the currently
entered callsign.

José F5JD

--- In ham-radio-deluxe@yahoogroups.com, "hglent" <hglent@...> wrote:
>
> I am running Build 2055.  I am using the logbook, but can not figure out how
to make the display show previous contacts.  The "Worked" display comes on, but
no other info about when or comments etc.
>
> Is there a way to have the previous contacts displayed?
>
> Paul K.
> TNX ... es ... 73S ... de ... WA0BAG
> DIT  ..  DIT
>

You're welcome ... 73
 Ruben Echevarria KA2HHB
SKCC #2132 EPC#3390 070 Club#861
10-10 International Club #33308
30Meter Digital Group #1148




________________________________
From: Juan Quiroga <juanpabloquiroga78@...>
To: ham-radio-deluxe@yahoogroups.com
Sent: Friday, July 3, 2009 9:24:23 PM
Subject: Re: [ham-radio-deluxe] Re: HRD in two different pcs, two differnt logs







I followed the directions and i was able to do the merge.

Thank you for your help .

Juan Quiroga
KI4RXE

____________ _________ _________ __
From: Ruben Echevarria <ka2hhb_2000@ yahoo.com>
To: ham-radio-deluxe@ yahoogroups. com
Sent: Friday, July 3, 2009 12:11:44 PM
Subject: Re: [ham-radio-deluxe] Re: HRD in two different pcs, two differnt logs

Rename log to logbook2.mdb then click import HRD logbook2.mdb log and it will
place the entries into your main log ....
Ruben Echevarria KA2HHB
SKCC #2132 EPC#3390 070 Club#861
10-10 International Club #33308
30Meter Digital Group #1148

____________ _________ _________ __
From: José Dumoulin <f5jd@...>
To: ham-radio-deluxe@ yahoogroups. com
Sent: Friday, July 3, 2009 1:13:34 AM
Subject: [ham-radio-deluxe] Re: HRD in two different pcs, two differnt logs

I suppose that you use build 2055. Have you tried to export one log to ADIF,
then open the other one (backup first) and import from ADIF just created.

José F5JD

--- In ham-radio-deluxe@ yahoogroups. com, "juanpabloquiroga78 "
<juanpabloquiroga78 @...> wrote:
>
> I have tried everything that I know, to see how I can consolidate the two
different log books into just one. I have to PCs that I normally used with HRD
and my FT-857D. but my logs are not the same, and I will like to consolidate
them.
> Could you help me out with this matter?
>
> Thank you.
>
> Juan Quiroga
> KI4RXE
>

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

Click on the  "Info" icon ....... it's next to the "Bell" icon
 Ruben Echevarria KA2HHB
SKCC #2132 EPC#3390 070 Club#861
10-10 International Club #33308
30Meter Digital Group #1148




________________________________
From: hglent <hglent@...>
To: ham-radio-deluxe@yahoogroups.com
Sent: Friday, July 3, 2009 6:32:07 PM
Subject: [ham-radio-deluxe] Logbook ??? Previous contact





I am running Build 2055. I am using the logbook, but can not figure out how to
make the display show previous contacts. The "Worked" display comes on, but no
other info about when or comments etc.

Is there a way to have the previous contacts displayed?

Paul K.
TNX ... es ... 73S ... de ... WA0BAG
DIT .. DIT




[Non-text portions of this message have been removed]

A couple of quick questions.



I have a an Elekraft KRC2 that I am just finishing
http://www.elecraft.com/KRC2/krc2.htm for my remote base and I was going to
configure it for either the parallel port on the remote computer for HRD or
for the data line on the TS480-HRD connection (either the actual one or the
virtual port).



Then, it came to me.  I am assuming that when I a do a parallel port control
it is for the remote computer?  Or, is it that I have to turn on the
Parallel port manager on the remote computer and not both setting it on the
local computer (of course, that would make sense).  I think I just answered
my own question.



As well, is the only way to do PSK (or any digital mode) on the remote is
either using Virtual Audio Cable on the local computer or Remote Desktop to
the remote computer.



On the good news, I finally got my SGC500 running just fine using a 70A
astron supply (not really recommended as it IS regulated) and adding a 70ah
car battery on a 6" lead to it.  I just need to get a very large relay to
disconnect the power supply from the battery when I am not using it as the
bleeders in the power supply can discharge the battery.



Mike VA3MW


   ----------

This email was Anti Virus checked by Astaro Security Gateway.
http://www.astaro.com

[Non-text portions of this message have been removed]

I have use HRD to remotely operate my ft89d over the lan. But I was wondering if
anyone has tried it over ax25 on 2 meters or 440 to control the rig. Then run
the audio over 440  or 2 meters. Like use 1 radio for control and the other for
audio. Just was wondering if I could dust off my tnc for this purpose.
This way myself or some of my other ham friends could use the rig since it could
be place where there is no internet access.


Have a Happy and Safe 4th of July

Jerry  WB9ONU