Mach 3 works well with parallel port. All you need is breakboard that works with
parallel ports. There are plenty of options that suit your needs.

Fortino

To: mach1mach2cnc@yahoogroups.com
From: juandres_valverde@...
Date: Wed, 4 Apr 2012 07:23:46 +0000
Subject: [mach1mach2cnc] Can Mach3 work with 2 plugins?
























       I have Mach 3, it is working with AJAX CNC and ethernet plugin. I do not 
know if I can to use the parallel port.



The mach 3 is using AJAX PLUGIN. Can I work with another plugin? I need to use
parallel plugin too. It is for a stepper motor...



Thanks in advance.


























[Non-text portions of this message have been removed]

We present an official PoKeys Mach3 plugin by PoLabs. The main trigger for this
plugin is the new capability of the PoKeys56U and PoKeys56E devices - Pulse
engine - that can be used as an external 3-axis motion controller with Mach3.
This means that there is no more need for LPT port to drive small CNC machines.
However, the plugin support all the basic mapping options as listed below.

PoKeys Mach3 plugin existing functionality
-  Support for PoKeys55, PoKeys56U and PoKeys56E devices
-  Mapping of PoKeys digital inputs to Mach3 OEM LEDs and OEM buttons
-  Mapping of Mach3 OEM LEDs to PoKeys digital outputs
-  Mapping of PoKeys encoders to Mach3 DROs
-  Support for matrix keyboard
-  Support for kbd48CNC keyboard on I2C address 1
-  Usage  of  PoKeys  Pulse  engine  (available  on  PoKeys56U  and  Pokeys56E 
devices)  as  external motion controller for Mach3 – 3 axes, each up to 25
kHz step frequency

Pulse engine option must be activated before the first use. During the testing
period, we will offer two free activation codes per PoKeys56 owner. Those who
are interested, please send the serial number of your PoKeys56 device to
support@.... The plugin with the basic manual is included in the
attachment in this post. Before using the plugin, please download and install
the latest PoKeys software update from www.poscope.com.

Plugin development will continue and additional options will be included in the
future.

It is avaiable here:
http://www.machsupport.com/forum/index.php/topic,21247.new.html#new

regards

Boris

Boris,
Thank you for releasing this. This is going to allow the people with
small machines a inexpensive alternative with lots of features ;) .

Thanks
Brian


boris.zalokar wrote:
> We present an official PoKeys Mach3 plugin by PoLabs. The main trigger for
this plugin is the new capability of the PoKeys56U and PoKeys56E devices - Pulse
engine - that can be used as an external 3-axis motion controller with Mach3.
This means that there is no more need for LPT port to drive small CNC machines.
> However, the plugin support all the basic mapping options as listed below.
>
> PoKeys Mach3 plugin existing functionality
> -  Support for PoKeys55, PoKeys56U and PoKeys56E devices
> -  Mapping of PoKeys digital inputs to Mach3 OEM LEDs and OEM buttons
> -  Mapping of Mach3 OEM LEDs to PoKeys digital outputs
> -  Mapping of PoKeys encoders to Mach3 DROs
> -  Support for matrix keyboard
> -  Support for kbd48CNC keyboard on I2C address 1
> -  Usage  of  PoKeys  Pulse  engine  (available  on  PoKeys56U  and  Pokeys56E
devices)  as  external motion controller for Mach3 – 3 axes, each up to 25
kHz step frequency
>
> Pulse engine option must be activated before the first use. During the testing
period, we will offer two free activation codes per PoKeys56 owner. Those who
are interested, please send the serial number of your PoKeys56 device to
support@.... The plugin with the basic manual is included in the
attachment in this post. Before using the plugin, please download and install
the latest PoKeys software update from www.poscope.com.
>
> Plugin development will continue and additional options will be included in
the future.
>
> It is avaiable here:
http://www.machsupport.com/forum/index.php/topic,21247.new.html#new
>
> regards
>
> Boris
>
>
>
> ------------------------------------
>
> www.machsupport.com - Web site AccessYahoo! Groups Links
>
>
>
>
>

Hello,
I think we have finished the bug fixes that where needed in turn. The
program extents was the big on for this release.I also did work on the
G83 and G83.1 calls. There was a bit of data that was not getting set
when it loaded the vars for the macro that is used for the drill cycle.

Thanks
Brian

Please define "Small machines" for me. Is it small by means of power or size?

Thanks

Fortino

Sent from my iPad

On 4 Apr 2012, at 18:43, "Brian Barker" <brianb@...> wrote:

> Boris,
> Thank you for releasing this. This is going to allow the people with
> small machines a inexpensive alternative with lots of features ;) .
>
> Thanks
> Brian
>
> boris.zalokar wrote:
> > We present an official PoKeys Mach3 plugin by PoLabs. The main trigger for
this plugin is the new capability of the PoKeys56U and PoKeys56E devices - Pulse
engine - that can be used as an external 3-axis motion controller with Mach3.
This means that there is no more need for LPT port to drive small CNC machines.
> > However, the plugin support all the basic mapping options as listed below.
> >
> > PoKeys Mach3 plugin existing functionality
> > - Support for PoKeys55, PoKeys56U and PoKeys56E devices
> > - Mapping of PoKeys digital inputs to Mach3 OEM LEDs and OEM buttons
> > - Mapping of Mach3 OEM LEDs to PoKeys digital outputs
> > - Mapping of PoKeys encoders to Mach3 DROs
> > - Support for matrix keyboard
> > - Support for kbd48CNC keyboard on I2C address 1
> > - Usage of PoKeys Pulse engine (available on PoKeys56U and Pokeys56E
devices) as external motion controller for Mach3 – 3 axes, each up to 25
kHz step frequency
> >
> > Pulse engine option must be activated before the first use. During the
testing period, we will offer two free activation codes per PoKeys56 owner.
Those who are interested, please send the serial number of your PoKeys56 device
to support@.... The plugin with the basic manual is included in the
attachment in this post. Before using the plugin, please download and install
the latest PoKeys software update from www.poscope.com.
> >
> > Plugin development will continue and additional options will be included in
the future.
> >
> > It is avaiable here:
http://www.machsupport.com/forum/index.php/topic,21247.new.html#new
> >
> > regards
> >
> > Boris
> >
> >
> >
> > ------------------------------------
> >
> > www.machsupport.com - Web site AccessYahoo! Groups Links
> >
> >
> >
> >
> >
>


[Non-text portions of this message have been removed]

Am I reading this correctly... The PoKeys56U and E can now be used like a PP or
SmoothStepper and actually be used for motion control?
Sweet!
I know this is "Alpha or Beta"  but is the intent to have it do threading,
backlash comp etc... someday?
Thanks!
Bob


From: mach1mach2cnc@yahoogroups.com [mailto:mach1mach2cnc@yahoogroups.com] On
Behalf Of boris.zalokar
Sent: Wednesday, April 04, 2012 3:53 AM
To: mach1mach2cnc@yahoogroups.com
Subject: [mach1mach2cnc] NEW: 'Official' PoKeys Mach3 Plugin - 'alpha' version
v0.01



We present an official PoKeys Mach3 plugin by PoLabs. The main trigger for this
plugin is the new capability of the PoKeys56U and PoKeys56E devices - Pulse
engine - that can be used as an external 3-axis motion controller with Mach3.
This means that there is no more need for LPT port to drive small CNC machines.
However, the plugin support all the basic mapping options as listed below.

PoKeys Mach3 plugin existing functionality
- Support for PoKeys55, PoKeys56U and PoKeys56E devices
- Mapping of PoKeys digital inputs to Mach3 OEM LEDs and OEM buttons
- Mapping of Mach3 OEM LEDs to PoKeys digital outputs
- Mapping of PoKeys encoders to Mach3 DROs
- Support for matrix keyboard
- Support for kbd48CNC keyboard on I2C address 1
- Usage of PoKeys Pulse engine (available on PoKeys56U and Pokeys56E devices) as
external motion controller for Mach3 – 3 axes, each up to 25 kHz step
frequency

Pulse engine option must be activated before the first use. During the testing
period, we will offer two free activation codes per PoKeys56 owner. Those who
are interested, please send the serial number of your PoKeys56 device to
support@...<mailto:support%40poscope.com>. The plugin with the basic
manual is included in the attachment in this post. Before using the plugin,
please download and install the latest PoKeys software update from
www.poscope.com<http://www.poscope.com>.

Plugin development will continue and additional options will be included in the
future.

It is avaiable here:
http://www.machsupport.com/forum/index.php/topic,21247.new.html#new

regards

Boris



[Non-text portions of this message have been removed]

Small in sense of the 3-axis and 25 kHz max. step frequency limit of PoKeys
motion controller.

Regards,
Matevz

--- In mach1mach2cnc@yahoogroups.com, fortino tan <fortino_tan@...> wrote:
>
> Please define "Small machines" for me. Is it small by means of power or size?
>
> Thanks
>
> Fortino
>

Yes, the threading support is on our to-do list.

Regards,
Matevž, PoLabs

--- In mach1mach2cnc@yahoogroups.com, Bob Berg <bberg@...> wrote:
>
> Am I reading this correctly... The PoKeys56U and E can now be used like a PP
or SmoothStepper and actually be used for motion control?
> Sweet!
> I know this is "Alpha or Beta"  but is the intent to have it do threading,
backlash comp etc... someday?
> Thanks!
> Bob
>
>

Matevz,

Thank you for straight things up. For me, that is not defined "small" as long it
is still running 3 KW ac servo motor per axis with 15 HP spindle.
This is really cool! Big step forward for POKeys
Really great works!

Fortino

Sent from my iPad

On 4 Apr 2012, at 21:36, "matevzpolabs" <matevz.bosnak@...> wrote:

> Small in sense of the 3-axis and 25 kHz max. step frequency limit of PoKeys
motion controller.
>
> Regards,
> Matevz
>
> --- In mach1mach2cnc@yahoogroups.com, fortino tan <fortino_tan@...> wrote:
> >
> > Please define "Small machines" for me. Is it small by means of power or
size?
> >
> > Thanks
> >
> > Fortino
> >
>
>


[Non-text portions of this message have been removed]

Congrat's Boris..

   Nice to see another motion device. Pokeys is a great device for general IO,
cool to see it do motion control as well.


Thanks,
Art
www.gearotic.com




   ----- Original Message -----
   From: fortino tan
   To: mach1mach2cnc@yahoogroups.com
   Sent: Wednesday, April 04, 2012 11:42 AM
   Subject: Re: [mach1mach2cnc] Re: NEW: 'Official' PoKeys Mach3 Plugin - 'alpha'
version v0.01



   Matevz,

   Thank you for straight things up. For me, that is not defined "small" as long
it is still running 3 KW ac servo motor per axis with 15 HP spindle.
   This is really cool! Big step forward for POKeys
   Really great works!

   Fortino

   Sent from my iPad

   On 4 Apr 2012, at 21:36, "matevzpolabs" <matevz.bosnak@...> wrote:

   > Small in sense of the 3-axis and 25 kHz max. step frequency limit of PoKeys
motion controller.
   >
   > Regards,
   > Matevz
   >
   > --- In mach1mach2cnc@yahoogroups.com, fortino tan <fortino_tan@...> wrote:
   > >
   > > Please define "Small machines" for me. Is it small by means of power or
size?
   > >
   > > Thanks
   > >
   > > Fortino
   > >
   >
   >

   [Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]

That's great, Brian! Will test it tomorrow and report back.

 
Thanks,

Dan
www.DYengineering.com



________________________________
  From: Brian Barker <brianb@...>
To: mach1mach2cnc@yahoogroups.com
Sent: Wednesday, April 4, 2012 2:45 PM
Subject: [mach1mach2cnc] New dev version uploaded

Hello,
I think we have finished the bug fixes that where needed in turn. The
program extents was the big on for this release.I also did work on the
G83 and G83.1 calls. There was a bit of data that was not getting set
when it loaded the vars for the macro that is used for the drill cycle.

Thanks
Brian



------------------------------------

www.machsupport.com - Web site AccessYahoo! Groups Links



[Non-text portions of this message have been removed]

Hello.

I'm hoping someone can help me with a rather puzzling problem.
I am running Mach3 on a three axis plasma. I have the A axis slaved to the Y
axis with rack and pinion gears. This worked fine. I have begun to use a
different .xml for a torch height controller and now the A axis will only run in
one direction, while the Y axis moves in both directions when using the hot
keys.

In the first .xml which worked, the hot key was 38 and 40 for the Y axis and 999
for the A axis

The new .xml has 38 and 40 for both axis and will not allow me to change the A
axis to 999.  I don't know if it makes a difference or not. But I am running out
of ideas. Any help at all would be much appreciated

Thank you

Hi:

    I think its buggy in that you have to set a key..so set the A axis to a
hotkey press of soemthing like alt-crtl-g , that should stop it from
interfering..


Thanks,
Art
www.gearotic.com




   ----- Original Message -----
   From: dfierro07481
   To: mach1mach2cnc@yahoogroups.com
   Sent: Wednesday, April 04, 2012 4:15 PM
   Subject: [mach1mach2cnc] Slaved axis trouble



   Hello.

   I'm hoping someone can help me with a rather puzzling problem.
   I am running Mach3 on a three axis plasma. I have the A axis slaved to the Y
axis with rack and pinion gears. This worked fine. I have begun to use a
different .xml for a torch height controller and now the A axis will only run in
one direction, while the Y axis moves in both directions when using the hot
keys.

   In the first .xml which worked, the hot key was 38 and 40 for the Y axis and
999 for the A axis

   The new .xml has 38 and 40 for both axis and will not allow me to change the A
axis to 999. I don't know if it makes a difference or not. But I am running out
of ideas. Any help at all would be much appreciated

   Thank you





[Non-text portions of this message have been removed]

When you jog the Y axis in slave mode with the A axis it will be using the
setting for the Y axis. It may not let you set the A axis.

You should be OK.

Bob Campbell

-----Original Message-----
From: mach1mach2cnc@yahoogroups.com [mailto:mach1mach2cnc@yahoogroups.com]
On Behalf Of dfierro07481
Sent: Wednesday, April 04, 2012 2:15 PM
To: mach1mach2cnc@yahoogroups.com
Subject: [mach1mach2cnc] Slaved axis trouble

Hello.

I'm hoping someone can help me with a rather puzzling problem.
I am running Mach3 on a three axis plasma. I have the A axis slaved to the Y
axis with rack and pinion gears. This worked fine. I have begun to use a
different .xml for a torch height controller and now the A axis will only
run in one direction, while the Y axis moves in both directions when using
the hot keys.

In the first .xml which worked, the hot key was 38 and 40 for the Y axis and
999 for the A axis

The new .xml has 38 and 40 for both axis and will not allow me to change the
A axis to 999.  I don't know if it makes a difference or not. But I am
running out of ideas. Any help at all would be much appreciated

Thank you



------------------------------------

www.machsupport.com - Web site AccessYahoo! Groups Links

Thanks Art.

I am able to set the hot key for A axis to whatever button I push. Just not
manual key in. However it makes no difference, even when they are set to the
same as the Y axis. The A axis will only go in one direction. I did read a
previous post where it was suggested that the signal at the #9 pin, which
controls direction for A axis, is too weak, and an additional parallel port
should be installed. I don't know what to try next.

--- In mach1mach2cnc@yahoogroups.com, art2 <fenerty@...> wrote:
>
> Hi:
>
>    I think its buggy in that you have to set a key..so set the A axis to a
hotkey press of soemthing like alt-crtl-g , that should stop it from
interfering..
>
>
> Thanks,
> Art
> www.gearotic.com
>
>
>
>
>   ----- Original Message -----
>   From: dfierro07481
>   To: mach1mach2cnc@yahoogroups.com
>   Sent: Wednesday, April 04, 2012 4:15 PM
>   Subject: [mach1mach2cnc] Slaved axis trouble
>
>
>
>   Hello.
>
>   I'm hoping someone can help me with a rather puzzling problem.
>   I am running Mach3 on a three axis plasma. I have the A axis slaved to the Y
axis with rack and pinion gears. This worked fine. I have begun to use a
different .xml for a torch height controller and now the A axis will only run in
one direction, while the Y axis moves in both directions when using the hot
keys.
>
>   In the first .xml which worked, the hot key was 38 and 40 for the Y axis and
999 for the A axis
>
>   The new .xml has 38 and 40 for both axis and will not allow me to change the
A axis to 999. I don't know if it makes a difference or not. But I am running
out of ideas. Any help at all would be much appreciated
>
>   Thank you
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

Hello.
  I downloaded the latest dev. version of Mach 3. Installed new dev. version.
Started new dev. version .062. Window pops up. Error found, Art Code 1, Attempt
Recovery.  Click yes and still get the same error message.  Mach 3 won't open.

Eric

My Bad... it was the installer getting the wrong Mach3 I reuploaded

thanks
Brian


handsmfg wrote:
> Hello.
>  I downloaded the latest dev. version of Mach 3. Installed new dev. version.
Started new dev. version .062. Window pops up. Error found, Art Code 1, Attempt
Recovery.  Click yes and still get the same error message.  Mach 3 won't open.
>
> Eric
>
>
>
>

Hmm...062 is still the version available on machsupport, is 062 now OK?

Tom

--- In mach1mach2cnc@yahoogroups.com, Brian Barker <brianb@...> wrote:
>
> My Bad... it was the installer getting the wrong Mach3 I reuploaded
>
> thanks
> Brian
>
>
> handsmfg wrote:
> > Hello.
> >  I downloaded the latest dev. version of Mach 3. Installed new dev. version.
Started new dev. version .062. Window pops up. Error found, Art Code 1, Attempt
Recovery.  Click yes and still get the same error message.  Mach 3 won't open.
> >
> > Eric
> >
> >
> >
> >
>

Brain said he reuploaded it, so I think you are good with the download.  Try a
feedhold during a g83.1 and resume, for me it prematurely ended the g83 cycle,
someone else confirming it would be good.

--- In mach1mach2cnc@yahoogroups.com, "thosj" <thosj@...> wrote:
>
> Hmm...062 is still the version available on machsupport, is 062 now OK?
>
> Tom
>
> --- In mach1mach2cnc@yahoogroups.com, Brian Barker <brianb@> wrote:
> >
> > My Bad... it was the installer getting the wrong Mach3 I reuploaded
> >
> > thanks
> > Brian
> >
> >
> > handsmfg wrote:
> > > Hello.
> > >  I downloaded the latest dev. version of Mach 3. Installed new dev.
version. Started new dev. version .062. Window pops up. Error found, Art Code 1,
Attempt Recovery.  Click yes and still get the same error message.  Mach 3 won't
open.
> > >
> > > Eric
> > >
> > >
> > >
> > >
> >
>

On Thu, 05 Apr 2012 14:49:51 -0000, you wrote:

>Brain said he reuploaded it, so I think you are good with the download.  Try a
feedhold during a g83.1 and resume, for me it prematurely ended the g83 cycle,
someone else confirming it would be good.

Feedhold doesn't work in Mach, during cycles. (or on Fanuc controllers
for that matter).

I can't remember whether Fanuc ignores it, waits until cycle has
finished or does a "stop" instead. It may be one of those setup options
where installer sets up preferred option or dependant on controller
model.


Steve Blackmore
--

Brian,

I'm noticing two things with 3.43.62 that are a bit odd. I haven't quite nailed
down the pattern yet so I thought I'd post to see what others are experiencing.
(this is for mill mode)

It seems that there are some new timing issues with 3.43.62:
1) when using keyboard keys to jog in continuous jog mode, mach seems to
sometimes to miss the first key down event. I have to release the key and push
it down a 2nd time to get the jog motion started. This happens about 50% of the
time. Does not happen on revs < 3.43.62.

2) Scripts seem to be running noticeably slower. Same scripts (no changes) that
used to be quicker now seem like they lag and run slower. There are also
differences while a script is running - I am seeing pauses where there did not
used to be pauses.
(This is hard to explain, but I've run the MSM probing scripts so many times
while testing MSM releases, that I know the timing an execution pattern of the
script actions.) With 3.43.62, the execution timing is noticeably different.

Dave

--- In mach1mach2cnc@yahoogroups.com, Brian Barker <brianb@...> wrote:
>
> Hello,
> I think we have finished the bug fixes that where needed in turn. The
> program extents was the big on for this release.I also did work on the
> G83 and G83.1 calls. There was a bit of data that was not getting set
> when it loaded the vars for the macro that is used for the drill cycle.
>
> Thanks
> Brian
>

That explains some Steve, it does feedhold ok, but exits the cycle on resume.  I
guess the answer is easy,  don't do that.  LOL


--- In mach1mach2cnc@yahoogroups.com, Steve Blackmore <steve@...> wrote:
>
> On Thu, 05 Apr 2012 14:49:51 -0000, you wrote:
>
> >Brain said he reuploaded it, so I think you are good with the download.  Try
a feedhold during a g83.1 and resume, for me it prematurely ended the g83 cycle,
someone else confirming it would be good.
>
> Feedhold doesn't work in Mach, during cycles. (or on Fanuc controllers
> for that matter).
>
> I can't remember whether Fanuc ignores it, waits until cycle has
> finished or does a "stop" instead. It may be one of those setup options
> where installer sets up preferred option or dependant on controller
> model.
>
>
> Steve Blackmore
> --
>

Noticed that dro's are not zeroing when I home at startup.  Auto zeroing is
checked in homing setup and always did work before.

Hi All,

Currently I don't have a sensor for spindle speed feedback installed on my
lathe and
would like to know if it possible to run CSS operation without it?

Thanks,
Tom


[Non-text portions of this message have been removed]

I can assure you that I didn't change the timming of the software but
anything could have happened. I will keep an eye out.. What are you
using for a motion device? (so we are testing the right hardware)

Thanks
Brian


mvcalypso wrote:
> Brian,
>
> I'm noticing two things with 3.43.62 that are a bit odd. I haven't quite
nailed down the pattern yet so I thought I'd post to see what others are
experiencing. (this is for mill mode)
>
> It seems that there are some new timing issues with 3.43.62:
> 1) when using keyboard keys to jog in continuous jog mode, mach seems to
sometimes to miss the first key down event. I have to release the key and push
it down a 2nd time to get the jog motion started. This happens about 50% of the
time. Does not happen on revs < 3.43.62.
>
> 2) Scripts seem to be running noticeably slower. Same scripts (no changes)
that used to be quicker now seem like they lag and run slower. There are also
differences while a script is running - I am seeing pauses where there did not
used to be pauses.
> (This is hard to explain, but I've run the MSM probing scripts so many times
while testing MSM releases, that I know the timing an execution pattern of the
script actions.) With 3.43.62, the execution timing is noticeably different.
>
> Dave
>
> --- In mach1mach2cnc@yahoogroups.com, Brian Barker <brianb@...> wrote:
>
>> Hello,
>> I think we have finished the bug fixes that where needed in turn. The
>> program extents was the big on for this release.I also did work on the
>> G83 and G83.1 calls. There was a bit of data that was not getting set
>> when it loaded the vars for the macro that is used for the drill cycle.
>>
>> Thanks
>> Brian
>>
>>
>
>
>
>
> ------------------------------------
>
> www.machsupport.com - Web site AccessYahoo! Groups Links
>
>
>
>
>

Do you have any home offset?

thanks
Brian




G_Mouer wrote:
> Noticed that dro's are not zeroing when I home at startup.  Auto zeroing is
checked in homing setup and always did work before.
>
>
>

Mach Parallel port driver
Dave


--- In mach1mach2cnc@yahoogroups.com, Brian Barker <brianb@...> wrote:
>
> I can assure you that I didn't change the timming of the software but
> anything could have happened. I will keep an eye out.. What are you
> using for a motion device? (so we are testing the right hardware)
>
> Thanks
> Brian
>
>
> mvcalypso wrote:
> > Brian,
> >
> > I'm noticing two things with 3.43.62 that are a bit odd. I haven't quite
nailed down the pattern yet so I thought I'd post to see what others are
experiencing. (this is for mill mode)
> >
> > It seems that there are some new timing issues with 3.43.62:
> > 1) when using keyboard keys to jog in continuous jog mode, mach seems to
sometimes to miss the first key down event. I have to release the key and push
it down a 2nd time to get the jog motion started. This happens about 50% of the
time. Does not happen on revs < 3.43.62.
> >
> > 2) Scripts seem to be running noticeably slower. Same scripts (no changes)
that used to be quicker now seem like they lag and run slower. There are also
differences while a script is running - I am seeing pauses where there did not
used to be pauses.
> > (This is hard to explain, but I've run the MSM probing scripts so many times
while testing MSM releases, that I know the timing an execution pattern of the
script actions.) With 3.43.62, the execution timing is noticeably different.
> >
> > Dave
> >
> > --- In mach1mach2cnc@yahoogroups.com, Brian Barker <brianb@> wrote:
> >
> >> Hello,
> >> I think we have finished the bug fixes that where needed in turn. The
> >> program extents was the big on for this release.I also did work on the
> >> G83 and G83.1 calls. There was a bit of data that was not getting set
> >> when it loaded the vars for the macro that is used for the drill cycle.
> >>
> >> Thanks
> >> Brian
> >>
> >>
> >
> >
> >
> >
> > ------------------------------------
> >
> > www.machsupport.com - Web site AccessYahoo! Groups Links
> >
> >
> >
> >
> >
>

You can do everything except threading.

Eric

--- In mach1mach2cnc@yahoogroups.com, Toma¾ Kuhl <kuhl.tomaz@...> wrote:
>
> Hi All,
>
> Currently I don't have a sensor for spindle speed feedback installed on my
> lathe and
> would like to know if it possible to run CSS operation without it?
>
> Thanks,
> Tom
>
>
> [Non-text portions of this message have been removed]
>

No home offset

--- In mach1mach2cnc@yahoogroups.com, Brian Barker <brianb@...> wrote:
>
> Do you have any home offset?
>
> thanks
> Brian
>
>
>
>
> G_Mouer wrote:
> > Noticed that dro's are not zeroing when I home at startup.  Auto zeroing is
checked in homing setup and always did work before.
> >
> >
> >
>

Super fast encoders added:
http://www.machsupport.com/forum/index.php/topic,21247.0.html
There will be frequent updates as our team is working hard on these plugin. If
you will experience any problems, please email to: support@...