Hi all, I have just seen a posting in the Flexedge reflector from Gerald Youngblood stating that there is a bug in the WBIR algorithm that can cause unexpected...
Really puzzled by this... I have a working Ensemble TXRX with a Delta 44 sound card. This setup works with HDSDR in both TX and RX but I'm struggling to get...
Hi everyone, Just a quick message to let you know that I've made a fork of the ghpsdr3-alex project, and I work on the support of USB2SDR board under linux. ...
Hello, I was wondering if anyone has had any success at using the PowerSDR software with the Soft66 series of receivers? I know that they are able to work...
Hola Cristos, there is possibility to use theUSB2SDRwith SDR1000?Considering this windows XP support ends at the end of this year, would be a good opportunity...
For three years I have been running PSDR-IQ v1.12.20 on LPT-based SDRs. Recently I kluged up one with USB interface and tried out v1.19.3.15. Of course the...
Greetings to the Group. I am a newbie at SDR. I was gifted with several SR40 RXTX v6.2, the old rockbound boards. I realize you group does not work with...
Hello Group, I am using an UHFSDR via LPT to PowerSDR. I have read Christos's note of the 3rd April 2010 on using DB9 RST and/or DTR but have failed to make it...
Over the past few years I've built three or four Si-570-based SDRs. To accurately calibrate them I've used a GPS-stabilized 10mHz reference input to a counter...
Hello, In version 1.19.3.15 after transition RX-TX the mirror channel gets out, it it is visible and is audible as-10...-20 db. Sometimes it occurs and is...
Good day to all of you in this forum. I am going to make my SDR receiver operating ( Avala 01 ) with the power SDR IQ program. I have the QRP2000 V1.4...
Concerning the USB2SDR: How is the keying implemented into PSDR-IQ from the key jack ? Can TX be keyed for phone via key jack ? Is keying and PTT to ground or...
Hi, I've instaled v1.19.3.15 and I have to admit I like it ! It works quite nice with my AVALA(G40)+Si570 in RX, but I have some troubles to set TX. Is there...
Hi Some time ago, I read a post where I think it was Christos who provided some really nice settings for the waterfall in powersdr. Because I had to reinstall...
Hi - I've downloaded PowerSDR-IQ_HSUSB_Driver.zip.zip and unzipped it to a folder. When I plug in the HSUSB board it asks me for a driver. But when I point...
WIndows 7 Home Premium with all latest updates. 64bit AMD with 8GB ram. Installed version 1.19.3.15 of powersdr-iq numerous times. I can run powersdr-iq as...
Good day! I gather that PSDR-IQ supports the ExtIO API, is that correct? Are there any extensions, or does it follow Alberto's document strictly? Thanks! ...
Hi Today I finally received my delta 44 and installed it in the computer. I have a question regarding cabling to the Ensemble RXTX. The ensemble inputs and...
Hi, I recently noticed, while using PSDR V 1.12 that I have no image rejection. I checked the I and Q outputs of the Softrock with a scope and it showed the 90...
Hi. I am rewiring audio and want to connect an computer/electret microphone to the Delta 44. I tried supplying voltage (9V battery, 2.2K and 10 uF) to the...
I am having a problem calibrating the Sis570 using the MoBo 4.3 with PSDR IQ and USB2SDR One usually setts all programs used to xtal Hz 114.285 and calibrate...
I have just begun to use PSR IQ with USB2SDR I find the filter boundaries call correct on the GUI but the signals do not correspond. normal SSB signals are...
Hi, Just wanted to share these as the band conditions are excellent on 10m today. 10m Contest receiving -> http://www.youtube.com/watch?v=g4fgLr7RL24 10m...
Evening all, my first post here. Well, I have glued together a simple receiver around the usb2sdr board. Have posted a couple of pix in the photos section of...
I wonder is any consideration for the various regional band plans being given with future versions of PSDR IQ I am still using VHF transverters with IFs of...
