hi all, have a blast with using psdr 2.5.3, most of the time I have my amp the kpa 500 on in stby. I have noticed that if the amp is off and I load up psdr as...
Hi Corey, Yes I am seeing this also on the KPA500, So I have been using powersdr-iq without the usb driver just using the cat control..it means its not...
Hi all, Using Powersdr and KX3 I can listen same usb or lsb stations via KX3 or through PWSDR in the same time (with small latency of course). I didn't succed...
Maybe in the PowerSDR you could use a minus sign in front of the CW offset?? From: powersdr-iq@yahoogroups.com [mailto:powersdr-iq@yahoogroups.com] On Behalf...
Does PowerSDR-IQ support the dongles with the RTL2832 chips or am I barking up the wrong tree? (and if so, can anyone point me to the right tree to use...
In this group, PSDR-IQ is "for homebrew SDR transceiver designs" as mentioned in group's description. The rtl2832 are nor 'homebrew' nor 'transceivers' so they...
Hi Group. I am using a PMSDR radio with a SB EMU-0202 Soundcard. My computer is a dedicated HP Tower 2.1 GHz running XP SP3. I got the PMSDR to work with...
... 10/04/2013 08:18 My Computer - Properties - Advanced - Performance - Settings - De-select all the tick boxes. This will minimize CPU loading at the expense...
what value to set parameter IF (Hz) in expert mode for Ensemble 2 and calibrate frequency signal RX with scale on the display ? TNK HB9AFZ, Francesco...
Hi Group When I do the Image Rejection Adjustment the software doesn't save the settings.......is this normal?? I'm using V1.12.20 with my PMSDR receiver. How...
I found out that the Image Rejection settings are being saved but only appear at the frequency it was adjusted at initially. Still need info on the "EIA"...
good day Marving, are you having a problem similar to my one ? Thanks, Ambrogio IW2FVO ________________________________ From: Wm Marvin <wmarvin2@...> ...
Gentlemen, my friend DM2GM recently installed a SB Audigy 2 PCI. PowerSDR 2.44 SV1EIA keeps telling him, the card is not found. Driver is installed, no...
Hello I'm using Softrock RX/TX v. 6.3 (with SI570 on USB) Soundcard EMU 0204 and PowerSDR v. 2.4.4 bulit by SV1EIA when trying to run an error occurs in...
The situation had been cleared up PowerSDR in my setup I have, so that Used as input card E-MU 0204 card while the output uses the Sound Blaster Audigy the...
Hi group, Just dabbling with the software and have a few observations/questions. Setup is a Softrock Lite II tapped on the 455 KHz IF of my Yaesu FT990. Sound...
The X-Fi is not supported but is a good card for RX only bearing in mind that it will only be effective for 48KHz because of an inbuilt LPFilter. Also there...
See http://k1qn.info/OneCardDigitalRevised.pdf It may be helpful. Many painful hours of trial and error condensed and distilled. ... -- Al Gerheim Adopt a...
What causes the latency? I just upgraded to a duo-core PC with 8G of RAM and the latency did not get any better from my single core with 2G of RAM. Not as much...
What kind of OSAre you using ? 73 Enviado de Samsung Mobile ve3tmt <ve3tmt@...> escreveu: What causes the latency? I just upgraded to a duo-core PC with...
I've only seen a Flex 5000 used one time but was really impressed with the filtering abilities. Can someone explain what differences there are using a Flex...
The latency is largely caused by the way Micr$oft Windoze handles sound. Suported Cards using ASIO drivers that bypass the Windoze sound routines eg FA-66...
